Tiandy PoE Switch
Tiandy POE Switch 8*10/100Mbps PoE Ports + 2*100/1000Mbps RJ45 Uplink Ports
TC-P3S010
Spec:2/E/HP
·8*10/100Mbps PoE Ports + 2*100/1000Mbps RJ45 Uplink Ports
·Comply with IEEE 802.3、IEEE 802.3u、IEEE802.3ab、 IEEE802.3x standard
·Ethernet port supports 10/100/1000Mbps adaptive
·Support POE Priority(QOS)：1>2>3>4>5>6>7>8（The port in front has higher priority）
·Flow control mode: full-duplex adopts IEEE 802.3x standard, half-duplex adopts back pressure standard ·Support Port Auto-flip(Auto MDI/MDIX)
·Adopting store-and-forward switching mechanism
·Panel indicator monitoring status and help failure analysis
·With three gears and one key intelligent dip switch，support VLAN、Default、Extend three modes
·Support port lightning surge: common mode 4KV (level C); Electrostatic ESD: air 8KV, contact 6KV (level C)
| I/O Interface | |
| Power | AC INPUT (100-240V) |
| Ethernet | 8*10/100Mbps PoE Ports ,2*10/100/1000Mbps RJ45 Uplink Ports |
| Performance | |
| Bandwidth | 5.6 Gbps |
| Throughput | 4.166Mpps |
| Packet Buffer | 448Kbit |
| MAC Address | 2K |
| Transfer Mode | Store and Forward |
| Standard | |
| Network Protocol | IEEE802.3 (10Base-T) IEEE802.3u (100Base-TX) IEEE802.3ab (1000Base-TX) IEEE802.3x (Flow control) |
| PoE Protocol | IEEE802.3af (15.4W) IEEE802.3at (30W) POE port output voltage: DC 52V POE power supply core: 1/2+; 3/6 |
| Industrial Standard | EMS: EN61000-4-2 (ESD)、 EN61000-4-5 (Surge) |
| Network Medium | 10Base-T: Cat3、4、5 or above UTP/STP (≤100m) 100Base-TX: Cat5 or above UTP/STP (≤100m) 1000Base-TX: Cat5 or above 上UTP/STP (≤100m) |
| Function | |
| LED Indicators | PWR (Power Supply), SW (DIP), 1-10 Green (Link & Data), POE Max (Power) |
| PWR | On: Powered on Off: Powered off |
| POE LED Buttons | Dual color light selection: default green (link data), switch yellow light (POE) |
| DIP Switch | |
| VLAN | VLAN: (Port Isolation Mode). In this mode, the PoE ports (1-8) of the switch cannot communicate with each other and can only communicate with the Uplink port (9、10). The port AI mode (PoE Watchdog) is turned on. |
| Default | Default: (Normal Mode). All Ports can communicate with each other, the transmission rate is 10/100Mbps adaptive; The port AI mode is disabled; |
| Extend | Extend: (Link Extension Mode). 1-8 ports force 10M, link 220M. The port AI mode (PoE Watchdog) is turned on. |
| Environment | |
| Working Environment | Working Temperature: -10~50℃ Storage Temperature: -40~70℃ Working Humidity: 10%~90%, non-condensingStorage Temperature: 5%~95%, non-condensing |
| Physical Specifications | |
| Dimension | Product Dimensions: 200*118*44mm Package Dimensions: 245*190*60mm Product N.W: 0.69KG Product G.W: 0.98KG |
| Packing Info | Carton Dimensions: 520*320*400mm Packing Quantity: 20PCS Packing Weight: 20.6KG |
| Power Voltage | Input Voltage: AC 100-240 V Power supply: 52V /1.92A |
| Power | Mainboard power: maximum 10W POE power: maximum 90W |