Dark Light
,

Tripplite inverter APSX 1250


The APSX1250 1250W APS X Series 12V DC 230V AC Inverter/Charger is a reliable power source for a
wide variety of equipment ranging from power tools and pumps to portable lighting and computer
equipment in heavy-load conditions. With no fumes, fuel or excess noise, it’s an excellent alternative to
generator power.
The DC-to-AC inverter features an automatic line-to-battery transfer switch and integrated charging
system that allow it to work as a vehicle inverter, standalone AC power source or extended-run UPS. It
delivers 1250W of continuous power, 1875W up to one hour, or 2500W of peak power up to 10 seconds
during equipment startup or cycling. An automatic overload detector, cooling fan and resettable AC circuit
breakers protect the unit from damage.
Designed for easy installation in RVs, over-the-road trucks, fleet vehicles and conversion vans, the
APSX1250 converts stored power from any 12V battery or automotive DC source to safe, stable,
computer-grade AC power and sends it to two C13 outlets for unlimited runtime. When powered by an
external 230V AC source, the unit keeps the user-supplied battery charged via a three-stage 7.5/30A
selectable charging system while simultaneously delivering AC power to connected equipment.
When used as a UPS, the APSX1250 responds to blackouts and brownouts with an automatic,
instantaneous transfer to battery-derived AC output. LEDs on the unit indicate AC/DC operational modes,
overload status, DC voltage level, shutdown status and system fault status.

Kodi i produktit : 9545 Kategori: ,
 

OVERVIEW

UPC Code 037332121660
 

INPUT

Nominal Input Voltage(s) Supported 230V AC
Maximum Input Amps / Watts DC INPUT: Full continuous load – 125A at 12VDC. AC INPUT: 9.3A at 230VAC with full inverter and charger load (3.3A max charger-only / combined input load to support charger and AC output is automatically controllable to 66%- 33%-0% based on AC output loading using the charger limiting set points – see manual for setting instructions)
Recommended Electrical Service DC INPUT: Requires 12VDC input source capable of delivering 125A for the required duration (when used at full continuous capacity – DC requirements increase during OverPower and DoubleBoost operation). For automotive applications, professional hardwire installation with 225A minimum battery system fusing is recommended. AC INPUT: 230VAC
Input Connection Type DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: IEC-320 C14 inlet connection

 

 

Voltage Compatibility (VAC) 230
Voltage Compatibility (VDC) 12
 

OUTPUT

Frequency Compatibility 50 Hz
Pure Sine Wave Output No
Nominal Output Voltage(s) Supported  

230V

Output Receptacles (2) Universal outlets
Continuous Output Capacity (Watts) 1250
Peak Output Capacity (Watts) 2500
Output Voltage Regulation LINE POWER (AC): Maintains 230V nominal sine wave output from line power source. INVERTER POWER (AC): Maintains PWM sine wave output voltage of 230 VAC (+/-5%).
Output Frequency Regulation 50 Hz (+/- 0.3 Hz)
Overload Protection Includes 5A input breaker dedicated to the charging system and 6A output breaker for AC output loads
 

BATTERY

Expandable Runtime Yes
Expandable Battery Runtime Runtime is expandable with any number of user supplied wet or gel type batteries
Expandable Runtime Description Runtime is expandable with any number of user supplied wet or gel type batteries
DC System Voltage (VDC) 12
Battery Pack Accessory (Optional)  98-121  sealed lead acid battery (optional)
Battery Charge Selectable 7.5 / 30A with 1/2 cycle transfer time
 

USER INTERFACE, ALERTS & CONTROLS

Front Panel LEDs Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7 levels reported). See manual for sequences.
Switches 3 position on/off/remote switch enables simple on/off power control plus “auto/remote” setting that enables distant on/off control of the inverter system when used in conjunction with optional  APSRM4  accessory when used in inverter mode. In AC uninterruptible power mode, auto/remote setting enables automatic transfer from line power to battery power – to maintain continuous AC power to connected loads.
 

SURGE / NOISE SUPPRESSION

AC Suppression Joule Rating 1020
 

PHYSICAL

Material of Construction Polycarbonate
Cooling Method Multi-speed fan
Form Factors Supported Mounting slots enable permanent placement of APSX1250 on any horizontal surface (see manual for additional mounting information)

 

 

Shipping Dimensions (hwd / in.) 12.50 x 11.00 x 10.75
Shipping Dimensions (hwd / cm) 31.75 x 27.94 x 27.30
Shipping Weight (lbs.) 26.00
Shipping Weight (kg) 11.79
Unit Dimensions (hwd / in.) 7.000 x 8.750 x 9.000
Unit Dimensions (hwd / cm) 17.78 x 22.23 x 22.86
Unit Weight (lbs.) 24
Unit Weight (kg) 10.89
 

ENVIRONMENTAL

Relative Humidity 0%-95% Non-Condensing
 

LINE / BATTERY TRANSFER

Transfer Time (Line Power to Battery Mode) 10 milliseconds (typical – compatible with many computers, servers and networking equipment – verify transfer time compatibility of loads for UPS applications)
Low Voltage Transfer to Battery Power In AC “auto” mode, inverter/charger switches to battery mode as line voltage drops to 144V (user adjustable to 163, 182, 201V – see manual)
High Voltage Transfer to Battery Power  

In AC “auto” mode, inverter/charger switches to battery mode as line voltage increases to 272V

 

STANDARDS & COMPLIANCE

Product Compliance RoHS