REPEATER EXTENTSION 120M 4-WAY POE EXTENDER
126.90 €
60W PoE Extender is a cost effective way to extend the Ethernet network range beyond
250m(max), delivering both data and power to network devices such as WLAN Access Points and
Network Cameras up to a distance of 250m while complying with IEEE802.3at/BT PoE and Data
standards.
The 60W PoEExtender supports 10/100Mbps data rates and delivers 802.3af/at/BT power levels,
up to 30W, The PoE Extender does not require local power and is powered via the PoE
input.Extended PoE installation range by additional 250m
Supports 10/100Mbps data rates- Provides IEEE802.3af/at power levels when powered by any IEEE802.3at/BT source- Extenders can be cascaded to reach up to 1000m- Cost effective installation- no need for local power- Plug and play installation- no configuration needed
Features:
Comply with IEEE 802.3af/at/BT Power over Ethernet
1 POEto4POE，10/100MbpsSupported
Extender the range of PoE an additional 250 meters
Automatically detects and protects PoE equipments from being damaged by
incorrect installation
Plug-and Play no configuration required
60W4Port PoE extender can forward both Ethernet and PoE power for 1 terminal
equipment via Cat5 ,Cat5e,Cat6,Cat6e,UTP cable.
Product Review:
60W 4-Port PoE Extender has 10/100Mbps Lan ports,among them,one for power
input,the other for power output. Comply with 10/100BASE-TX,IEEE 802.3
af/at/BT-PoE.
Power input for single port is 60W (POE++,BT) . Power output for single port is
30W.
Applicable Range:
Used with AP,IP camera,IP telephone and the other network equipments in the
situation of the lack of power line or far away from the power outlets
Installed at hotels,schools,buildings,villages,etc.
Other Specification:
PoE input: 1 RJ45 port
PoE output: 4 RJ45 port
Network Medium: Cat5 or better UTP cables (less than 250m)
Repeater Mode: Store and forward
MACAddress Table: 2K
Packet Buffer Memory: 48 Byte
Switching Capacity: 400Mbps
PoE Standard: IEEE 802.3af/at/BT
Input power: 60 Watts
Output power: 30 Watts (max)
Power Supply Type: 1/2+,3/6-,Mode A,End-Span
Network Protocol: IEEE 802.3i-10BASE-T, IEEE 802.3u: 100BASE-TX, IEEE
802.3x-Flow Control, IEEE 802.3at/BT-Power over Ethernet;
Regulation Compliance: FCC Part 15B, ROHS Directive 2011/65/EU,Low Voltage
Directive 2014/35/EU,EMC Directive 2004/108/EC;
Storage Humidity: 5%~90%, No Condensation;
Dimension: 95x70x21mm Weight: 173g
Note:
Please don’t place any heavy thing on the PoE extender;
To prevent the water seeping into the extender,please keep PoE extender away
wet environment;
Suggest to use PoE extender indoors.When installing the extender in
outdoor,please install it in a waterproof place