UPS RIELLO S3T 20 CPT A0 DS3TK20CA000RUA 3-phase in / 3-phase out

4 356.92 €

S3T 20 CPT A0

Koha e arritjes së produktit : Nën 5, 2026 - Nën 6, 2026
Kodi i produktit : 970733 Kategori: Brand:
Përshkrim

Riello Sentryum S3T 20 CPT 20kVA / 20kW është një UPS profesional trefazor me teknologji Online Double Conversion (VFI), i projektuar për mbrojtjen e serverëve, qendrave të të dhënave, pajisjeve industriale dhe sistemeve kritike. Ofron faktor fuqie në dalje 1.0, stabilitet të lartë të tensionit dhe efikasitet deri në 99% në modalitetin Smart Active. Mbështet bateri VRLA AGM/GEL, NiCd, Li-ion dhe Supercapacitors, si dhe përfshin ekran grafik me prekje, komunikim USB/RS232 dhe ndërfaqe për monitorim dhe kontroll.

Specifications
Specification Details
Brand Riello UPS
Model Sentryum S3T 20 CPT
UPS Technology Online Double Conversion (VFI)
Rated Power 20,000 VA / 20 kVA
Active Power 20,000 W / 20 kW
Input Voltage 380 / 400 / 415V AC, Three-Phase + Neutral
Input Voltage Tolerance 400V ±20% at Full Load (Wider Tolerance Under Specific Conditions)
Input Frequency Tolerance 40–72 Hz
Input Power Factor 0.99
Bypass Rated Voltage 380 / 400 / 415V AC, Three-Phase + Neutral
Bypass Voltage Tolerance 180–264V Phase-to-Neutral (Adjustable Lower and Upper Limits)
Bypass Rated Frequency 50 / 60 Hz (Selectable)
Bypass Frequency Tolerance ±5% (Selectable)
Bypass Phases 3 + Neutral
Output Rated Power 20,000 VA
Output Active Power 20,000 W
Output Current 32A (Bypass) / 29A (Inverter)
Output Phases 3 + Neutral
Output Power Factor 1.0
Output Waveform Sinusoidal
Crest Factor 3:1
Static Voltage Stability ±0.5%
Dynamic Voltage Stability EN 62040-3 Performance Class 1, Non-Linear Load
Output Frequency 50 / 60 Hz
Output Voltage Distortion – Linear Load <1%
Output Voltage Distortion – Non-Linear Load ≤1.5%
Supported Battery Types VRLA AGM, GEL, NiCd, Li-ion, Supercapacitors
Battery Charging Modes Single-Level, Two-Level, Cyclic Recharge (Selectable)
Smart Active Efficiency Up to 99%
Noise Level at 1 m <40 dBA ±2 (Smart Active Mode)
Display Graphic Touchscreen Display
Status Indicators UPS Status LED Bar
Communication Interfaces USB, RS232
Communication Expansion Slots 2× Communication Interface Slots
Digital Inputs 5× Opto-Isolated Inputs
Relay Outputs 4× Output Relays
Remote Signaling Voltage-Free Contacts
Protection Rating IP20
Operating Temperature 0°C to +40°C
Relative Humidity 5–95% Non-Condensing
Enclosure Color RAL 7016
Dimensions (H × W × D) 700 × 280 × 840 mm
Weight 52 kg
UPS Classification IEC EN 62040-3: VFI-SS-111
Safety Standard IEC EN 62040-1
EMC Standard IEC EN 62040-2
Low Voltage Directive 2014/35/EU
EMC Directive 2014/30/EU
RoHS Compliance Yes